Medium duty tool tensions and cuts SKG Pin Type and other stainless steel cable ties
View Items
Type 316 stainless steel strap with type 304 stainless steel ratchet screw for self tensioning – 10mm (0.39”) width x 0.3mm (.012”) thick, 200 lb strength, operating temperature -80C to 400C, 5 per bag
View Items
Type 316 stainless steel strap and clasp, 0.3mm (.012”) thick, operating temperature -80C to 400C, 100 per bag.
View Items
Strap Type Banding Tie is a 940mm strip of stainless steel banding attached to a specially designed stainless steel buckle to provide the strength of a band with the convenience of a cable tie. Use for permanent or temporary bundling or fastening.
STBT940 – 940mm (37″) x 12.7mm (0.5″) x 0.38mm (0.015″) Type 304 stainless steel with specially designed buckle featuring a close-down locking cover.
View Items
Ratchet Band Clamp consists of a stainless steel band affixed to a specially designed tensioner with integral ratchet wheel and lever. No tensioning tools are required to tension the RBC1000/10.
Sold 20 pieces per polybag.
View Items
All Purpose band is stainless steel banding with pre-punched holes.
12mm (1/2″) x 0.76mm (0.030″) x 25m (82.5′) Type 316 stainless steel with 5mm (3/16″) diameter holes at 15cm (19/32″) centres. Sold per coil in self-dispensing cartons.
To Fasten APB4 – Fit the APB4 band around the objects to be fastened and form a loop. Cut off. Match holes in both sides of the loop at the desired position. Insert 5mm (3/16″) bolt(s) through the holes and tighten nuts to secure.
View Items
5/8″ (17 mm) x 0.028″ (0.7 mm) with 17/64″ (7 mm) diameter holes at 13/16″ (20 mm) centers
33 ft (10 m) on self-dispensing plastic spool – 6″ (150 mm) diameter X 1″ (25 mm), wt 1.6 lbs (0.72 kg)
View Items