TGT-180 Light Duty Strap Tensioning Tool with Cutter

Handle Strap Tensioning Tool with Cutter

TGT-180 Light Duty Strap Tensioning Tool with Cutter

Light duty tool tensions and cuts polypropylene and fibre strapping when used with wire buckles.

Request Information

Specifications
Carton Dimensions	9.0 x 3.75 x 1.75 in
Shipping Weight	0.1 lb 0.05 kg
Industry Served	Plumbing & HVAC

Features and Benefits
One Hand Squeeze-Action	Convenient
Light Weight, Spring	Easy to use
Grips Both Strap Ends	Hands-off strap tensioning
All Steel Tools	Durable, long lasting

To Tension Banding
To Tension Banding	After installing the wire buckle onto the strapping, insert the near end of the strap between the tool’s forks and rotate the tool counter-clockwise (towards you) to grip the strapping., Grip the far end of the strap (first side of the buckle) with your hand or pliers., Pull the strap with the P173 until tight. When tight, release the strap from the forks. Insert the near strap into the cutter slot and slide the blade against the strap to cut.

To Tension Banding

After installing the wire buckle onto the strapping, insert the near end of the strap between the tool’s forks and rotate the tool counter-clockwise (towards you) to grip the strapping., Grip the far end of the strap (first side of the buckle) with your hand or pliers., Pull the strap with the P173 until tight. When tight, release the strap from the forks. Insert the near strap into the cutter slot and slide the blade against the strap to cut.

Note
Note	Note P173 is included in ESK-01 strapping kit.