Medium duty tool tensions and cuts steel or stainless steel banding widths from 1/4″ (6 mm) to 3/4″ (19 mm) and thicknesses from 0.015″ (0.4 mm) to 0.030″ (0.7 mm) Use with BNG, BSB, BSBLD, PPA316 and PVC316 series stainless steel banding, and with steel strapping.
|Carton Dimensions||12 x 3 x 2 in 300 x 75 x 50 mm|
|Banding Width||1/4 to 3/4 in 6 to 19 mm|
|Banding Thickness||0.015 to 0.030 in 0.4 to 0.7 mm|
|Industry Served||Shipbuilding & Marine Oil & Gas & Mining Electric Utility Plumbing & HVAC Automotive|
|Features and Benefits|
|Ratchet Tensioning||Tensions in discreet increments for good control|
|All Steel Tools||Durable, long lasting|
|Lever Handle||Easy to use Two dimensional motion for tension and cut|
|Hammer Knob||Separate hammer not required|
|To Tension Banding|
|To Tension Banding||Insert the end of the banding through slots in the tool nose and the mandrel. Slide the tool forward so that the nose approaches the buckle or wing seal., Push and pull the handle back and forth to turn the mandrel and draw the banding through the buckle., When the banding is tight, rotate the tool over the buckle or wing seal. Squeeze the handles together to cut the banding. Use the knob opposite, winding mandrel as a hammer head to tap down ears of buckles or wing seals.