PB2100 Push-Bar Tensioning Tool

Light to Medium duty tool tensions stainless steel banding or steel strapping with widths from 1/4″ (6 mm) to 3/4″ (19 mm) and thicknesses from 0.015″ (0.4 mm) to 0.020″ (0.5 mm) Use with BSBLD series stainless steel banding or steel strapping and steel or stainless steel seals or wing seals.

Request Information

Specifications
Width	1/4 to 3/4 in 6 to 19 mm
Thickness	0.015 to 0.020 in 0.4 to 0.5 mm
Carton Dimensions	10 x 6 x 3 in 26 x 150 x 75 mm
Materials	Steel
Shipping Weight	3 lb 1.4 kg
Industry Served	Plumbing & HVAC

Features and Benefits
All Steel Tools	Durable, long lasting, use same tool for stainless steel banding and steel strapping
Squeeze Handle, Ratchet Wheel and Push Bar	Easy to use One hand operation

To Tension Banding
To Tension Banding	Insert the tail of the banding through the slot in the tool nose and between the gripper plate and gripper lever., Slide the tool forward so that the nose approaches the seal or wing seal., Squeeze the handle to draw the banding through the seal or wing seal., When the banding is tight, rotate the tool over the seal or wing seal. Cut the banding. To remove the cut-off tail, pull it through the gripper.

To Tension Banding

Insert the tail of the banding through the slot in the tool nose and between the gripper plate and gripper lever., Slide the tool forward so that the nose approaches the seal or wing seal., Squeeze the handle to draw the banding through the seal or wing seal., When the banding is tight, rotate the tool over the seal or wing seal. Cut the banding. To remove the cut-off tail, pull it through the gripper.