Light to Medium duty tool tensions stainless steel banding or steel strapping with widths from 1/4″ (6 mm) to 3/4″ (19 mm) and thicknesses from 0.015″ (0.4 mm) to 0.020″ (0.5 mm) Use with BSBLD series stainless steel banding or steel strapping and steel or stainless steel seals or wing seals.
|Width||1/4 to 3/4 in 6 to 19 mm|
|Thickness||0.015 to 0.020 in 0.4 to 0.5 mm|
|Carton Dimensions||10 x 6 x 3 in 26 x 150 x 75 mm|
|Shipping Weight||3 lb 1.4 kg|
|Industry Served||Plumbing & HVAC|
|Features and Benefits|
|All Steel Tools||Durable, long lasting, use same tool for stainless steel banding and steel strapping|
|Squeeze Handle, Ratchet Wheel and Push Bar||Easy to use One hand operation|
|To Tension Banding|
|To Tension Banding||Cut the banding. To remove the cut-off tail, pull it through the gripper., Insert the tail of the banding through the slot in the tool nose and between the gripper plate and gripper lever., Slide the tool forward so that the nose approaches the seal or wing seal., Squeeze the handle to draw the banding through the seal or wing seal. When the banding is tight, rotate the tool over the seal or wing seal.