CT2840 Stainless Steel Cable Tie Tensioning Tool with Auto Cut-Off

Pistol-Grip tool tensions and automatically cuts stainless steel cable ties with widths from 4.6mm (0.18″) to 7.9mm (0.31″) and thicknesses to 0.25mm (0.01″). Pre-set a desired tension level, and tool automatically tensions and cut-off tail at pre-set level.

Request Information

Specifications
Weight	0.0
Length	0.0
Width	0.0
Carton Dimensions	9 x 5 x 2 in 230 x 130 x 50 mm
Shipping Weight	2.0 lb 0.9 kg
Cable Tie Width	0.18 to 0.31 in 4.6 to 7.9 mm
Cable Tie Thickness	0.01 in Up to 0.25 mm
Cable Tie Series	KSS, KSSH, KSSLT/7
Type	Slide
Industry Served	Shipbuilding & Marine Oil & Gas & Mining Electric Utility Plumbing & HVAC Automotive

Specifications

Weight

0.0

Length

0.0

Width

0.0

Carton Dimensions

9 x 5 x 2 in 230 x 130 x 50 mm

Shipping Weight

2.0 lb 0.9 kg

Cable Tie Width

0.18 to 0.31 in 4.6 to 7.9 mm

Cable Tie Thickness

0.01 in Up to 0.25 mm

Cable Tie Series

KSS, KSSH, KSSLT/7

Type

Slide

Industry Served

Shipbuilding & Marine
Oil & Gas & Mining
Electric Utility
Plumbing & HVAC
Automotive

Features and Benefits
Light Weight, Compact Design	Especially good for overhead work and tight spaces
Pistol Grip Trigger Action	Convenient one-hand tensioning operation
Cutter in Nose	Cuts tail close to clasp - no protruding tail
Preset Tension and Auto Cut	No guess work, consistent cable tie tension

Features and Benefits

Light Weight, Compact Design

Especially good for overhead work and tight spaces

Pistol Grip Trigger Action

Convenient one-hand tensioning operation

Cutter in Nose

Cuts tail close to clasp - no protruding tail

Preset Tension and Auto Cut

No guess work, consistent cable tie tension

Applications
Applications	Stainless Steel Cable Tie

Applications

Stainless Steel Cable Tie

To Automatically Tension Stainless Steel (SS) Cable Ties
To Automatically Tension Stainless Steel (SS) Cable Ties	Preset the desired tension using the slide switch on the tool handle. Insert the tail of the cable tie through the slot in the tool nose and over the gripper plate., Slide the tool forward so that the nose approaches the clasp. Squeeze the handle to actuate the foot to pull the tail and to push the clasp., When the cable tie is tight, the tool automatically cuts off the tail.

To Automatically Tension Stainless Steel (SS) Cable Ties

Preset the desired tension using the slide switch on the tool handle. Insert the tail of the cable tie through the slot in the tool nose and over the gripper plate., Slide the tool forward so that the nose approaches the clasp. Squeeze the handle to actuate the foot to pull the tail and to push the clasp., When the cable tie is tight, the tool automatically cuts off the tail.