Band-N-Go Inc.
PRODUCTSStainless Steel
Cable Ties
Stainless Steel Banding, Buckles & BracketsStainless Steel Banding & Cable Tie ToolsSteel Strapping
& Seals
Steel Strapping ToolsQ-Band®
Plastic Banding
Specialty BandingFollow Us On:LinkedInFacebookWordPressTwitterYouTubeGoogle Plus

We Supply Fastening & Strapping Tools to Large Companies and Industries

Printable PagePrintable Page Email This PageEmail This Page

Specialty Banding

 

APB4-All Purpose Band 1/2"

APB4-All Purpose Band 1/2"
[click to enlarge]
APB4-All Purpose Band 1/2"
All Purpose band is stainless steel banding with pre-punched holes.
12mm (1/2”) x .76mm (.030”) x 25m (82.5’) Type 316 stainless steel with 5mm (3/16”) diameter holes at 15.cm (19/32”) centres.
Package: Self dispensing carton Weight: 3 lbs

RBC1000/10-Ratchet Band Clamp

RBC1000/10-Ratchet Band Clamp
[click to enlarge]
RBC1000/10-Ratchet Band Clamp
Ratchet Band Clamp consists of a stainless steel band affixed to a specially designed tensioner with integral wheel and lever. No tensioning tools are required to tension the RBC1000/10.
1000mm (39”) x 0.2mm (0.0079” [35 GA]) hemmed band with 1mm thick ratchet clamp, Type 304 stainless steel.
Package: 20 pieces per polybag.

STBT940-Strap Type Banding Tie

STBT940-Strap Type Banding Tie
[click to enlarge]
STBT940-Strap Type Banding Tie
Strap Type Banding Tie is a 940mm strip of stainless steel banding attached to a specially designed stainless steel buckle to provide the strength of a band with the convenience of a cable tie. Use for permanent or temporary bundling or fastening. 940mm (37”) x 12.7mm (0.5”) x .38mm (.015”) Type 304 stainless steel with specially designed buckle featuring a close-down locking cover. Loop tensile strength 270 lb. (1200N).
Package: 100 pieces per polybag Weight: 3.5 lb



back to top

Site created by Thomas Web Solutions